Email us at

In addition to our off the shelf products, here are some of the jobs we also do

  • Custom timers and relay sequencers
    • For example, you have a light that needs to be turned on for 10 minutes every 5 hours but every 10 hours it must be on for 15 minutes instead. Just tell us how many outputs and how you need them controlled
  • Mechanical model animation
    • A recent client needed a Trivision sign to rotate and change images every 12 hours. This involved motion control using stepper motors and a custom designed sequencing system all at a low cost using Arduino-based electronics
  • Arduino software/hardware integration
    • Were you attracted to Arduino based on its popularity but don’t have the time to learn all about it? We can help. We will write your sketch for you or build out a complete system
  • Small low-voltage control panels
    • We will design and build your circuit and install it in an industrial-rated enclosure
  • Full custom hardware and firmware/software design projects
  • Entertainment props automation and lighting

Contact us with your questions. No ideas are too crazy, no projects are too simple: we prefer small, quick-turnaround projects that keep our minds racing around the hamster wheel 🙂

Take a look at some of our recent projects.

You can reach us for questions at

Just want to subscribe to this blog and get emailed when we add new posts or updates?


7 thoughts on “Contact”

  1. HI, you recently responded to my query about a long-distance water supply system that i posted to the spark fun web forum
    (by Coacervate).

    I have been reading your pages here and I wanted to ask you opinion of the following solution:

    Problem: How to detect when a 600 meter plastic waterline has been broken (e.g. by cattle or eathquakes/both are plentiful here).

    Possible Solution: Place a current sensor on the pump. When the line is intact, then the pressure is high and the pump is drawing about 3 amps. If the line breaks then the pressure goes low and the pump only draws about 1.5 amps. That seems like a big enough difference to detect with the right sensor and then use an arduino board to turn of the pump.

    I’d be interested in your opinion before launching into this…thanks. Or perhaps you have a flow meter in mind?

    1. Hi Wayne:
      Sorry I missed this for so long. Yes, I agree that the current measurement technique is the least invasive. There are good current sensors that work well with Arduino.
      I’ve used the ACS-712 and it works well.

  2. Hello

    I have photo booth machines and i would to plug bill acceptor them. Bill acceptor will send “space bar ” or “enter” command to pc when receive payment. However i haven’t any idea how can i do. I will buy bill acceptor. Some of them support usb connection, and some of them rs232. I am not sure which ones should i prefer. And which software should i use. Does yours “pulse readers” software can make that job? Or could you suggest any solution? Thanks

    Cosku Arslan

    1. Hi Cosku:
      Our pulse readers support the bill acceptors that provide pulse outputs. The other types are designed to connect directly to the PC.

  3. I am looking for a solution for automatic inventory counting whereby, as parts get thrown into a bin, it give me a count of how many I threw in. It would need to be mobile where I can put it on different bins.

Leave a Reply

Your email address will not be published. Required fields are marked *